VIDENT iAuto702 Pro Reset EPB for 2018 Benz E Class

VIDENT iAuto702 Pro

Written by:

What’s Vident iAuto702 Pro:

Vident iAuto 702 pro is a cost-effective professional service tool for the mainstream vehicles on the market. It covers the majority of special functions such as ABS/SRS Diagnosis, Oil Light Reset, EPB, BRT, etc.

Vident iAuto702 Pro Functions:

1.OBDII/EOBD+CAN/ ABS,SRS diagnosis:

Read codes
Clear codes
Vehicle information
Live data
View freeze frame data

Component test/active test

2.OBDII/EOBD+CAN other functions:
– I/M readiness
– O2 monitor test
– On-board monitor test
– Component test
– Modules present

3.ABS/SRS other diagnosis function:

-Adaptation

What functions can iAuto702 Pro support for Mercedes-Benz?

ABS/SRS diagnosis, Oil Light Reset, EPB, DPF(Regeneration of Diesel Particulate Filter), TBA/TPS (Throttle Body Alignment), Injector Coding, TPMS(Tire Pressure Measuring Sensor Reset), SAS(Steering Angle Sensor Reset), Immobilizer Programming, ABS Bleed, Suspension Match

How to reset EPB for 2018 Benz E class by iAuto702 Pro?

Procedure:

Connect iAuto 702Pro device with your car

Enter application menu

Select “EPB V16.00”

Loading data…

Brake pad replacement message shown as below:

1.If the brake pad wears the brake pad sense line, the brake pad sense lines sends a signal sense line to the on-board computer to replace the brake pad. After replacing the brake pad, you must reset the brake pad. Otherwise, the car alarms.

2.Reset must be performed in the following cases:

Press “OK” to select car make (Mercedes-Benz)

Then select “Manual Select”

Select car models (213-E Class)

Switch on ignition

Establishing vehicle communication…

Enter “Actual value”

Note:

*The vehicle must be at a standstill

*Secure the vehicle to prevent it rolling away

*Release parking brake

The status of right electric parking brake is open

[F3]: move to the assembly position

[F4]: Deactivate assembly position

Press [F3] button

The right electric parking brake has been moved to assembly position

Press [F2] to next

iAuto702 Pro reset EPB success

Vident iAuto702 Pro multi-application service tool Benz full vehicle coverage:

VIDENT iAuto702 Pro Multi-Application Service Tool for Benz Full Car List

That’s all.